We are here today to show you how to
set up your RAXE300 router. Let's get started. Make sure you have removed all the RAXE300
contents from the package. The contents you will need for
your setup will include: The RAXE300 Router Ethernet cable Power adapter for your router A service activated Internet modem Now download the Nighthawk App on your iOS or Android mobile device to start your RAXE300 installation. Reboot your internet modem. Disconnect all devices from the modem. Wait 1 to 2 minutes
before powering back on. Wait for the modem’s LED lights to stabilize before
powering up your RAXE300. This could take up to five minutes. To connect your router to your modem, plug one end of the included Ethernet cable into
one of the ports labeled “Internet.” We’ll plug into the 2.5G port for faster internet connectivity. Then plug in the other end, into one of the LAN or Ethernet ports of your
internet provider’s Modem or Gateway. To power your router, find the port for the power adapter
on
the back of your RAXE300 Router. When the cable is connected, plug the
power brick into a power outlet. The RAXE300 router will automatically power up. If the device is not powered on, push the power button
on the back of the RAXE300. Once your router’s LED light turns on… …you can follow the step-by-step process
using the Nighthawk app, available for iOS and Android. From the Nighthawk App, you will be able to set up and enable a Guest Network, Smart Parental Controls and the NETGEAR Armor cybe
rsecurity solution. Check the video in the description below to learn how to
install your RAXE300 router using the Nighthawk App. To learn more about the RAXE300 router, visit netgear.com/home/wifi/routers/raxe300 That's all for today. Thanks for watching.
Comments