[Music] [Applause] [Music] Hello friends, today we will see how to focus on a selfie stick. See this. Focus on the selfie stick or if you have a YouTube channel for video vlogging, then you need a light or something. To explain this, we can remove the front camera also, see this, you can also take a selfie in this way, so see step by step how you have to make it, in this way you can see this light coming out here. I have made this type of light which looks similar to it, you will find it in the
market. I have made it with a lithium battery which is available for ₹ 100. It has a charging kit in the market which can be connected to our micro USB. See this, we can also charge in this way. This one and here we have made a socket for it. To get the cell out, we have to get another cell which is charged or here also we can charge it . So watch the video till the end. See, if you have not subscribed to my channel yet, then the name of my channel is Baba Fix, like it, share it and subscribe it
. Now we have to make it in this way. Let's start by placing this LED on this gimbal and make it To refuse, we will cover it and here we will place this cell in this manner and on the other connector we will place its charging circuit here so that we can change the cell. For this, first of all we will put the bad one on a lamp. For this LED, we will cut this cover, hit the sign [music] Little by little, we will cut it, in this way it will sit, with the help of the order gana, we will make a litt
le neck here to wire out, in this way we will With the help of double sided tape and solder it here, we will stick the mine connector on this side, mine battery on this side, positive on this side , the rule of equal connector is installed in it, check battery , we will also put a switch in it for rechargeable connection , small switch on this switch . But the shoulder gana should not remain for too long otherwise its switch gets damaged. In this way we have to fit the positive wire here and the
bracket of the cell here. For this we will make it with side tape . For strength we will make it like this. After this, we will stick it here by hugging it evenly. After this, we will also stick the switch here with double sided tape. For this , see that the switch has been seated in this manner. Now we will fix it here. To fix it here, we will We will go out and put a lot of tape on it, we will mark where the double sided tape will be placed, we have marked it in this way, put it there, now it
will fit in this way and we will put [music] on it here. Look, our unit is ready, we will put a cell in it, the positive will go up, like this , we will check by putting the mobile, for this we will make the switch in the same way, it is dark here, now we need a powerful flash, now we will have to charge this cell also. In this second connector, we will put this PCB in the socket and it is charging . With this cell, we can keep it charging and when our YouTube video is shot, if the cell runs ou
t, then we will charge it in it. First of all, we will charge this PCB. We will put the charging circuit here and fix it in this way. We will keep its mouth a little outside. We have placed the charging pin on all sides so that when we put it in the penis, it will not come out of the circuit. After this, we will invite this battery on the mine. On B mines we will put black wire and on the positive we will put red wire, so first we will cut the wire of this size, later we will put a little should
er on it, the photo is taken out , after this we will take the size of positive, we will take it from this side, from here we will What will we do now, where the black is completely connected, now we will do the rate in the same way, the red wire here, first we will take fevicol here [music] a little bit here [music] hold the second After this will be joint, we will see our complete system. We will try and see that this is our micro USB cable, we will connect it in this way, our charging has sta
rted, now if we want to do this, then we can come out of it, wherever we want it, we can put it in it as we had made this symbol of the selfie stick. We have installed a light on it, we will take out this charger and put it on it. See, if you are doing this then now we can keep the charging done by putting an extra charge in it. Charging is done in this way. Charging is done till full. After this, a blue light will come on here . Friends, we have missed to install the charging circuit. We will a
lso install the charging circuit here so that our cell does not go full down. We will cut the red wire . After this, first of all we will connect these two batteries. There is a connection, this is also positive here, the negative of the battery will come here from this hall, after that the battery positive here, after that the mines out of the battery is here and this is positive and positive, we can charge it from here [Music]
Comments