I'm going to show you how to make a simple
pet jacket start by gathering the supplies on the screen and printing off your PDF pattern
starting with construction we're going to grab the main panel place a secondary fabric off to
the side and Stitch the stomach strap panels to the side of the main panel at a/4 in seam
allowance next we're going to begin assembly on the hood panels by installing eyelets to
both of the main fabric panels and you can use any size eyelet you want grab the middle
Hood panel and the hood panels and we're going to attach the hood panel to the middle Hood
panel and lastly sew the secondary and Main fabric Hood panels together moving on grab the
pocket panels place the right sides together Stitch the outside edge repeat this process
for the pocket flat panels place the right sides together Stitch the outside edge add a top
Stitch attach the hood panel to the main panel on the top Edge sew both of the main panels
together at a/ Quin seam allowance pull
the right sides out and add a top Stitch sew the
pocket panel and the pocket flat panel to the center back with the pocket panels installed
flip the jacket over to the bottom add the velcro to the straps finishing it off by adding
cord to the hood and your jacket is complete
Comments