Main

How to replace the Headlight Assembly 2011-2017 Toyota Camry 🚗

Find the parts used in the video on CarParts.com just there https://carparts.solutions/CAMRY ⚙️ NEEDED CARPARTS AND PRODUCTS - Headlight : https://carparts.solutions/HeadlightD_CAMRY and https://carparts.solutions/HeadlightP_CAMRY 💪 TIGHTENING TORQUES - No tightening torques for this operation 🛠 TOOLS The toolbox recommended by CARPARTS.COM to repair your Toyota Camry : - https://carparts.solutions/ToolBox List of the tools we used to replace the headlight on a Toyota Camry : - Hydraulic jack : https://carparts.solutions/FloorJack - Jack stands : https://carparts.solutions/JackStands - Wheel lug wrench - Fork - Multi-bit screwdriver - 10mm socket - Phillips screwdriver Don't forget to subscribe : https://www.youtube.com/@CarPartscomOfficial 🛻 COMPATIBLE VEHICLES The operation and tools displayed in the video should be available on the following vehicles : - 2011 Toyota Camry - 2012 Toyota Camry - 2013 Toyota Camry - 2014 Toyota Camry - 2015 Toyota Camry - 2016 Toyota Camry - 2017 Toyota Camry 📽 🛠 USEFUL VIDEOS 🛠 📽 No relevant videos related to this operation - How to replace the Battery 2011-2017 Toyota Camry ⚡ : https://youtu.be/LGIo6OjnaFM - How to jack your Toyota Camry : - How to replace the Front Bumper 2011-2017 Toyota Camry : https://youtu.be/jZtXYasWKXg ⚠️ CARPARTS.COM'S INFOS - In order to change the headlights on your vehicle, you will need to remove the front bumper to have full access. - For safety reasons, we advise you to disconnect the battery. 🚨 DISCLAIMER This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area. 📚 CHAPTERS 0:00 Intro 0:10 Disconnect the battery 0:37 How to pull up your Camry 1:13 Remove the top grille holding parts 2:10 Remove the bumper 2:25 Unscrew the headlight holding bolts 2:48 Remove the headlight 3:11 Install the new headlight 3:55 Screw the bolts back 4:10 Reinstall the bumper 4:20 Reinstall the top holding parts 4:45 How to lower your Camry 5:29 Reconnect the battery

CarParts.com

2 weeks ago
You can order the head light used in the video  on Carparts.com via the link in the description. Turn your engine off and set the parking brake. Pull on the hood release handle and open the hood. For safety reasons, we advise  you to disconnect the battery. To do so, we recommend watching the video :  ‘How to replace the Toyota Camry car battery’. Loosen the stud bolts on the front wheels. In order to change the headlights on your vehicle, you will need to remove the  front bumper to have full a
ccess. Lift the front of your vehicle. Place the vehicle on the jack stands. We strongly suggest watching our video on 'How to jack your Toyota Camry safely"  before carrying out this step. Don't forget to put the wheels under the vehicle! Start by removing the plastic cover by  pulling on the 9 plastic rivets using a fork. Then remove the cover. Using a multi-bit screwdriver and a 10 mm  socket, unscrew the two bolts holding the grille. Then, using a Phillips screwdriver, unscrew  the 3 plastic
rivets holding the grille. Now you need to remove the front bumper. To do so, we recommend watching the video :  “How to replace the front bumper Toyota Camry?” Using a multi-bit screwdriver and a 10 mm socket,  unscrew the 3 bolts holding the head light. Then unscrew the front retaining bolt of the  side bumper retainer using the same tools. You can now extract the  headlight from its location. Remove the electrical connectors  from the high beam lightbulb. Then unclip the electrical  sheath f
rom the headlight. Then remove the electrical connectors from the  low beam lightbulb and the parking lightbulb. You can order the head light used in the video  on Carparts.com via the link in the description. Take the new head light All the bulbs are supplied with it. Remove the protective film. Put the electrical connectors of the  lightbulbs and the electrical sheath back on. Put the light back in. Screw the three headlight retaining bolts back on. Screw the side bumper retainer bolt back on.
Now you need to reinstall the front bumper. To do so, we recommend watching the video :  “How to replace the front bumper Toyota Camry?” You can now screw the two bolts  holding the grille back on. Then put the 3 rivets back in place. Put the plastic cover back on, then put the 9 rivets back on. Then, you will be able to put  the wheels back on your vehicle. Put your vehicle back on the ground before  properly fixing the wheels in place. Reconnect the battery. Operation complete.

Related articles

Comments